Skip Navigation Website Accessibility
 


JBL AWC82 8" Passive All-Weather Compact 2-Way Coaxial Loudspeaker in Light Grey - Special Order

The JBL AWC82 is a compact, coaxial-driver, 2-way, highly weather-resistant full-range loudspeaker system which is ideal for speech and music-fill in a wide variety of applications, including sports facilities, racetracks, stadiums, fairgrounds, rodeos, skating rinks, themed entertainment venues, cruise ships, water parks, outdoor background music/paging systems, swimming pools, and a wide variety of other outdoor or indoor venue types.

  • Highly weather-resistant IP56 rating
  • Consistent 120° x 120° broadband pattern control
  • Components:
    • 200 mm (8 in) woofer with Kevlar-reinforced cone and 50mm (2 in) voice coil.
    • 25 mm (1 in) exit compression driver with uniquepatented design and high temperature polymer diaphragm.
  • Extraordinary clarity for speech, with extended frequency response for music.
  • Advanced high-slope crossover network for constant coverage and smooth, natural midrange.
  • 250 Watt power handling (average continuous pink noise) with high sensitivity provides high SPL capability.
  • High-power passive crossover network.
  • Overload protection
  • 80 Hz – 20 kHz frequency response.
  • 200 Watt 70V/100V multi-tap (built-in transformer) or direct 8 Ohm low-impedance.
  • Frequency Range (-10 dB):  80 Hz –20 kHz
  • Frequency Response (±3 dB):  100 Hz– 20 kHz
  • Coverage Pattern:  120° x 120°
  • Directivity Factor (Q):  8.1 (1 k –16 kHz)
  • Directivity Index (DI):  8.4 dB (1 k– 16 kHz)
  • Long-Term System Power Rating (IEC):    
    • 250 W 2hrs.
    • 200 W 100 hrs
  • Sensitivity (2.83V @ 1m):  94 dB(Ave. 100 Hz – 20 kHz)
  • Maximum SPL:    
    • Direct 8 Ohm:  118 dB (peaks of 124 dB)
    • 200 W Tap:  117 dB
  • Crossover Network:  1.8 kHz, 3rd order (18 dB/oct) high-pass plus conjugate to HF, 2nd order low-pass to LF
  • Nominal Impedance:  8 ohms
  • Transformer Taps:    
    • 70V:  200W, 100W, 50W, 25W
    • 100V:  200W, 100W, 50W
  • Low Frequency Driver: Kevlar-reinforced cone with weather treatment, 50 mm (2 in) voice coil.
  • High Frequency Driver:  25 mm (1 in)diaphragm and voice coil diameter, high temperature polymer diaphragm, patented design, fluid-cooling.
  • HF Driver Protection:  Minimum audibility SonicGuard™ HF overload protection
  • Enclosure:  ABS with Glass enclosure, heavily braced
  • Attachment:  Two M10 (fine-thread) points for included U-bracket. M6 secondary safety attachment point on back panel
  • Grille:  Corrosion-resistantzinc-rich extra-thick powder coated steel grille, 3-layer assembly with foam and woven poly mesh backing.
  • Input Connection:  CE-compliant covered barrier strip terminals. Barrier terminals accept up to 9 mm outside 4 mm inside open-lug (#6, #8 or #10) plus bare wire up to 2.5 mm2 (12 AWG) wireor spade lugs. Terminal compartment cover equipped with gland nut that forms water-tight seal with round-jacketed cables with outside diameters between 4.0mm (0.16") and 9.0 mm (0.36")
  • Environmental:  IP56 per IEC529,with a minimum 5° downward aiming angle. Exceeds Mil Spec 810 for humidity, salt spray, temperature & UV, and ASTM G85 for salt spray (168 hrs).
  • Dimensions:    
    • 11.8 x 11.8 x 12.0 (300 x 300 x305mm), cabinet
    • 13.0 in (331 mm) including gland nut
    • 14.2 in (359 mm) including bracket extending to back
  • Net Weight:  21.5 lb (9.8 kg),25.5 lb (11.6 kg) with U-bracket
  • Shipping Weight:  31.0 lb (14.1kg)
  • Included Accessories:  U-bracket, matches loudspeaker color (light grey or black), zinc-rich extra-thick powder coated, steel.