CAD C195 Cardioid Condenser Microphone

   
Quantity:    

Add to Cart


FOUND A LOWER PRICE? NEED A PACKAGE DEAL? DON'T SEE THE GEAR YOU CRAVE...WE'LL GET IT! GIVE US A SHOUT 1-800-317-9566!








(some products ship direct from manufacturer and may take 7-10days)
The wide and flat frequency response of the CAD C195 provides unsurpassed natural transparent sound quality. The cardioid pickup pattern minimizes annoying feedback (when used close to sound reinforcement speakers and monitors) and reduces the pickup of unwanted off-axis sounds. A transformerless electronic design provides optimum low frequency response and low distortion. An effective internal multistage pop filter minimizes wind and breath noise. The CAD C195 has a Flex-FormTM hardened steel grille screen that dramatically resists deformation while greatly reducing any risk of adverse performance caused by a bent or dented ball screen. This unique ability to retain its original shape assures that the CAD C195 will maintain its attractive appearance. The CAD C195 features the CAD exclusive (I.N.R.-3TM) Impact Noise Rejection system. Our proprietary rubber shock mount isolates the transducer from the barrel, thus dramatically reducing cable, stand and handling noise. The need for any external shock mounting device is virtually eliminated. The low-frequency response of the CAD C195 may be enhanced by increasing or decreasing the distance from the sound source. This phenomenon is technically known as “proximity effect”. Nominal or “flat” response is generated at a distance of 24 inches or more. However, as the distance to the sound source decreases, the bass sensitivity increases, providing a solid, robust character. The CAD C195 is supplied complete with a zippered vinyl protective pouch and a snap-in microphone swivel-mount.

Features


  • Generating Element: Electret condenser (Phantom Powered)
  • Polar Pattern: Unidirectional (Cardioid)
  • Frequency Response: 50 Hz - 18 kHz
  • Output Level: Open Circuit
  • Voltage: -55 dB (0 dB = 1 volt per microbar)
  • Impedance: 500 ohms
  • Dynamic Range: 110 dB
  • Equivalent Noise Level: Less than 22 dB, A-weighted
  • Maximum SPL: 132 dB (1% THD, open circuit)
  • Supply Voltage: 9 - 52 Vdc, positive pins 2 & 3 reverse-polarity protected
  • Current Required: Less than 5 mA over operating voltage range
  • Phasing: Positive pressure on diaphragm generates a positive voltage on pin 2 relative to pin 3
  • Grille Screen: Hardened Steel Mesh
  • Case: Steel and die cast zinc alloy
  • Finish: Durable soft feel, non-slip, titanium gray body, midnight black screen