Blue Microphones Blueberry Cardioid Condenser Microphone

   
Quantity:    

Add to Cart




FOUND A LOWER PRICE? NEED A PACKAGE DEAL? DON'T SEE THE GEAR YOU CRAVE...WE'LL GET IT! GIVE US A SHOUT 1-800-317-9566!






(some products ship direct from manufacturer and may take 7-10days)

The Blueberry Microphone from Blue features a precision-engineered, large-diaphragm cardioid condenser design with an open, natural response tailored especially for vocals. It can also be used for recordings with acoustic guitars, hand percussion, drums, and similar instruments. There is a pressure-gradient, large diaphragm element sputtered with a combination of gold and aluminum and a 6-micron mylar film tensioned to hand-built brass backplates for a high transient (peak) response and minimized distortion. A hand-built capsule and discrete low-noise circuitry provide detailed highs, smooth mids, and an articulated low-end. The microphone includes a wooden storage box and a shockmount.

 

Pressure-Gradient Diaphragm
Pressure-gradient, large diaphragm element sputtered with a combination of gold and aluminum
Peak Response
6-micron mylar film is tensioned to hand-built brass back plates resulting in high transient (peak) response and minimized distortion
Performance
Well-balanced response characteristics for recordings with vocal, voice-over, and acoustic instruments
Cardioid Polar Pattern
Cardioid polar-pattern effectively isolates the source signal
MZ02 Electronics
MZ02 solid-state electronics are based on Class-A circuitry for pristine, quiet output without noise or signal coloration
Wide Custom Frequency Response
Wide 20 Hz to 20 kHz frequency response, enabling use of the microphone for most recording applications


FULL FEATURES

  • Proprietary Blue single-membrane large diaphragm capsule
  • Commanding, intimate presence for vocals and instruments
  • Fast transient response and high-SPL handling
  • Blue heritage of premium audio and innovative design


TECHNICAL SPECIFICATIONS

  • Transducer Type: Condenser, Pressure Gradient
  • Polar Patterns: Cardioid
  • Frequency Response: 20Hz – 20 kHz
  • Sensitivity: 20.0 mV/Pa at 1kHz (1Pa = 94dB SPL)
  • Output Impedance: 150Ω
  • Rate Load Impedance: Not less than 1 kΩ
  • Maximum SPL: 140dB SPL (2.5kΩ, 0.5% THD)
  • S/N Ratio: 86dB-A (IEC 651)
  • Noise Level: 9.0 dB-A (IEC 651)
  • Dynamic Range: 131dB (@2.5kΩ)
  • Power Requirement: +48V DC Phantom Power(IEC 268-15)
  • Weight: 520g
  • Dimensions: 235mm x 50mm x 30mm

INCLUDED ACCESSORIES

  • Protective wooden Box
  • S2 Shock