Skip Navigation Website Accessibility
 


Mackie PPM1008 8-Channel 1600-Watt Powered Mixer

PPM Series

POWER TO THE PEOPLE

Ultra-lightweight, immensely powerful and equipped with the tools to get the perfect sound anywhere without breaking your back. Each model features dual Mackie-designed Class-D Fast Recovery™ amplifiers which provide the kind of power required for modern speakers, 32-bit RMFX+ “Gig Ready” FX and premium Mackie mic preamps for the ultimate powered mixer. 

BIG SOUND, SMALL FOOTPRINT

The PPM Series Powered Mixers are an excellent choice for small to medium sized venues or bars that have limited space. Its compact and ultra-lightweight design mean you can pull it out when you need it and have all the power you need. PPM is an excellent solution for integration into existing passive loudspeaker systems, bands touring small clubs or any application requiring an ultra-lightweight, powerful, all-in-one mixing and amplification solution. 

FEATURES

Legendary Mackie circuitry combined with road worthy design and portability result in the ultimate powered mixer.

Optimal Performance
DIALED IN

OPTIMAL PERFORMANCE

Premium Mackie preamplifiers ensure transparent, low-noise/high-headroom characteristics right at the front of the mixer.  True 48V phantom power allows every condenser mic to perform at its full potential. Individual channel inserts and dedicated in-line compressors add even more ways to fine tune your mix.

TWEAK

"GIG READY" FX

The RMFX+ processor features 24 solid FX that are known for their utility and usability.  Small, medium and large room reverbs with the choice of a warm or bright characteristic put your mix in the right space. Simple, rich choruses and an array of practical delays with tap tempo enable you to create

Reliable Power
LOUD

RELIABLE POWER

Every PPM mixer features two ridiculously robust Class-D power amps for Mains and Monitors designed for maximum efficiency and minimum heat, delivering 95% of power straight to the speakers. Fast Recovery™circuitry eliminates the risk of pesky amp latching. And to help protect your speakers, weve included a built-in internal limiter that rival many outboard limiters available.

Fine Tune Your Mix
ADJUST

FINE TUNE YOUR MIX

Designed for maximum tonal control in a live sound environment, the legendary Mackie 3-band active channel EQ, with up to 15dB boost/cut capability per band, provides more tone-sculpting latitude than any other mixer in its class.

Absolutely Armored
TOUGH

ABSOLUTELY ARMORED

The PPM Series Mixers are "Built-Like-A-Tank", armored inside a solid steel chassis that helps protect the electronics from any potential environmental hazard (think beer). Extremely durable polycarbonate ABS end caps (PPM608 &PPM1008) will protect the mixer from years of abuse

All The Bells And Whistles
SMART

ALL THE BELLS AND WHISTLES

Dedicated In-line Compression provides increased presence and punch for vocals and instruments. Plus, features like 2 built-in DI boxes for direct instrument connections, dual 7-Band GEQ on the Mains and Monitor outputs provide the tools any engineer needs to create a solid mix.



Mackie PPM1008 Specs

Power Rating 800+800W Peak
Mic/Line Inputs 3-pin XLR Microphone x8 
1/4" Phone Mono Line x4
L/R Stereo 1/4" Phone Line x2 
L/R Stereo RCA Phono Line x2
1/4" Phone Mono Line/Instrument x2
Mains Inputs Unbalanced 1/4" Phone A/B x2
In-Line Inputs/Returns No
Aux Sends MON1 Send - 1/4" Phone 
FX/MON2 Send - 1/4" Phone
Aux Returns No
Inserts 1/4" TRS Phone 
All Mono and Instrument / Line Inputs
BUS (Group) Outputs MAIN Left/Right - L/R Stereo 1/4" Phone
Main Output Speaker Outputs - A/B Speakon and 1/4" Phone Connectors
Tape I/O L/R RCA Phono
Monitor Outputs MON1 Send - 1/4" Phone 
FX/MON2 Send - 1/4" Phone
EQ Section Channel EQ 
High Shelving: +/- 15dB @ 12kHz
Mid Peak Sweep (Mono chs): +/- 15dB 
Mid Sweep Range: 100Hz to 8kHz
Hi Mid Peaking (Stereo chs): +/- 15dB @ 2.5kHz 
Lo Mid Peaking (Stereo chs): +/- 15dB @ 400kHz
Low Shelving: +/- 15dB @ 80Hz 
9-Band Graphic EQ
Main and Monitor 1: +/- 15dB @ 63, 125, 250, 500, 1k, 2k, 4k, 8k and 16kHz
Solo/Mute No
Channel Level Control Rotating Pot Controls
Trim/Gain Control Rotating Pot Controls
Phantom Power +48V
Metering Stereo Peak LEDs
Frequency Response Mic Mono Inputs: < 10Hz to 80kHz 
Line Mono Inputs: < 10Hz to 40kHz
Line Stereo Inputs: < 10Hz to 75kHz
Signal-to-Noise Ratio -128dBu
Total Harmonic Distortion (THD) Mic Mono: < 0.007% High Gain 
Mic Mono: < 0.005% Low Gain
Line Mono: < 0.005% Low Gain 
Line Stereo: < 0.01% at Main Out
Power Supply 120VAC 50/60Hz 
680W
Dimensions (HxWxD) 12.3 x 19.3 x 11.4" (314 x 490 x 290mm)
Weight 24.5 lb (11.1kg)