With a simple, quick and harmless install, the ToneWoodAmp magically attaches to the back of your acoustic guitar using magnets, allowing you to add different effects UNPLUGGED – NO AMP REQUIRED, With the effects emanating naturally and organically from the body of the guitar.
ToneWoodAmp Solo for Electric Acoustic Guitars
WHAT IS IT
HOW IT WORKS
Similar to the way the strings excite the top of the guitar to produce sound, ToneWoodAmp excites the back of the instrument, producing sound waves of effects such as reverb, echo, delay, tremolo and more, which interact with the natural sound of the guitar itself.
WHAT ELSE
The ToneWoodAmp is also a multi-effect processor which you can connect with any Amp/PA system and is also an iDevice interface allowing you to experiment with audio and MIDI apps.
COMPATIBILITY
The ToneWoodAmp works virtually with any electro- acoustic guitar. For Non-Electric-Acoustic Guitar’s we are offering high quality “technician-free” pickup bundles: a Fishman Neo-D soundhole magnetic pickup for steel string guitars and the Kremona NG-1 tie-bar piezo pickup for nylon string guitars.
OVERVIEW
Amazing Amp-less
Acoustic Experience
The ToneWoodAmp provides the newest and most unique acoustic guitar playing experience without the need for an amplifier! It enhances the natural sound of virtually any acoustic guitar, adds depth, texture and effects, and creates a unique surround sound feel never experienced by acoustic guitar players before.
It Takes Only 5 Minutes
For The Initial Install
The initial installation and setup of the ToneWoodAmp is fast and easy, it requires no tools, and has no permanent impact on your guitar.
After the initial install, detaching and attaching the ToneWoodAmp to your guitar is a snap.
Doubles As a
Multi-Effect Processor
The ToneWoodAmp can be used also as a multi-effect processor. In a situation where you need to amplify your guitar, you can connect the output jack to your amp or P.A. system and use the “blend” mode to dial the amount of guitar/effect you want to send out.
Works With Any
Acoustic Guitar
You can install the ToneWoodAmp on any flat or (slightly) arched-back acoustic guitar. Electric and non-electric*, steel and nylon strings, all can work with the ToneWoodAmp.
Compatible pickups: magnetic pickup for steel string acoustic guitars and under saddle piezo pickup for both nylon and steel string guitars.
Triples as an
iDevice interface
If you desire to experiment with more effects and other cool tools, you can use your ToneWoodAmp with an iDevice and try your favorite apps including guitar effects, MIDI instruments and much more!.
One ToneWoodAmp Can
Work With All Your Guitars!
Because the ToneWoodAmp can be quickly and easily removed and reattached, it can easily work with all of your acoustic guitars.
Get one X-Brace for each of your guitars and see how it changes your experience with any acoustic guitar that you own!
GENERAL SPECS OF THE TONEWOODAMP
Inputs and outputs: the TWAmp has one 1/4″ input (from guitar), one 1/4″ output (to amp or P.A.) and one 1/8″ TRRS I/O for iDevice (and other devices).
Effects: Built-in 8 effects: 3 types of Reverbs, Echo/Delay, Tremolo/Delay, Leslie style Tremolo, Auto-Wah, and Overdrive. (+Chorus Via USB Update)
Effect parameters: each effect has three parameters. For example, the delay/echo effect has the following: Speed, Feedback and Reverb.
Save/recall of effect settings: there are 10 memory locations for each effect where you can store/recall favorite effect settings.
Power: 3 AA batteries hold for an average of 8 hours.